Specification
Pacific Plastics Electrical Conduit is produced for the conveyance of electrical wires, above or below ground. The compound is PVC 1120 Type 1 Grade 1, with a cell class of 12454B per ASTM D1784.
Our Sch40 Electrical Conduit is produced in strict compliance to UL 651 and NEMA’s TC-2. It can be installed both in the underground and above ground applications.
Sizes of 1/2″ – 6″ are produced in Grey color, 20 foot and 10 foot lengths Belled End.
The dimensions of the Sch40 conduit per UL 651 are shown in the following table:
| Size | OD | T | C |
|---|---|---|---|
| 1/2 | 0.840 | 0.109 | 1.00 |
| 3/4 | 1.050 | 0.113 | 1.25 |
| 1 | 1.316 | 0.133 | 1.50 |
| 1 ¼ | 1.660 | 0.140 | 1.75 |
| 1 ½ | 1.900 | 0.145 | 2.00 |
| 2 | 2.375 | 0.154 | 2.25 |
| 2 ½ | 2.875 | 0.203 | 2.50 |
| 3 | 3.500 | 0.216 | 3.25 |
| 4 | 4.500 | 0.237 | 4.00 |
| 5 | 5.625 | 0.258 | 4.00 |
| 6 | 6.625 | 0.280 | 6.00 |
OD – Outside Diameter
T – Wall Thickness
C – Approximate Bell Depth
Certification
This is to certify that, in this category of PVC pipe, all the products manufactured by Pacific Plastics have been inspected, sampled and tested in accordance with the following specifications and have been found to meet or exceed the requirements of those specifications.
Raw Materials
- PVC1120 Type1 Grade1
- Cell Class 12454
- ASTM D1784 Specification for Rigid PVC Compounds
PVC Pipe
- Sch40 Grey
- Solvent Weld Belled End
- ½” – 6” IPS
- Sunlight resistant per UL651
- UL651 & NEMA TC 2
- NFS Listed